Read operation instructions first.
●
Observe safety instructions.
●
These operation instructions are part of the product.
●
Store operation instructions during product life.
●
Pass on instructions to any subsequent user or owner of the product.
Target group:
This document contains information for assembly, commissioning and maintenance staff.
Reference documents:
●
Manual (Operation and setting) of actuator controls ACExC 01.2 Profibus DP
●
Manual (Fieldbus device integration) of actuator controls ACExC 01.2 Profibus DP
Reference documents are available on the Internet at: http://www.auma.com.
Table of contents Page
51. Safety instructions.................................................................................................................
51.1. Prerequisites for the safe handling of the product
61.2. Range of application
71.3. Warnings and notes
71.4. References and symbols
82. Short description...................................................................................................................
103. Name plate..............................................................................................................................
144. Transport and storage...........................................................................................................
144.1. Transport
154.2. Storage
175. Assembly................................................................................................................................
175.1. Mounting position
175.2. Handwheel fitting
175.3. Mount actuator to valve
185.3.1. Overview on coupling variants
185.3.2. Mount actuator (with coupling)
215.4. Mounting positions of local controls
215.4.1. Mounting positions: modify
226. Electrical connection.............................................................................................................
226.1. Basic information
246.2. Overview of AUMA electrical connections
266.3. KT/KM electrical connection
276.3.1. Terminal compartment: open
286.3.2. Cable connection
306.3.3. Fieldbus cables: connect
306.3.3.1. Fieldbus connection for line topology
326.3.4. Terminal compartment: close
336.4. KP/KPH electrical connection
346.4.1. Terminal compartment: open
356.4.2. Cable connection
366.4.3. Fieldbus cables: connect
2
SQEx 05.2 – SQEx 14.2/SQREx 05.2 – SQREx 14.2 Control unit: electronic (MWG)
Table of contents ACExC 01.2 Non-Intrusive Profibus DP