- 19 -
General Management
Presets
Alarm time 1: 6:00 a.m.
Alarm time 2: 8:00 a.m.
Time zone: 00
Hour format: 24 h
Temperature unit: °C
Quick setting
When setting numerical values, you can achieve a faster change of values by pres-
sing and holding the +|MEM/RF button
and the -| RCC button .
Switching the button sound on or off
The button sound is switched off by default.
• Press and hold the °C/°F| button-sound button
until a sound is heard to turn
on the button sound. A tone sounds when you operate the base station by pressing
a button.
• Press and hold the °C/°F| button-sound button until a sound is heard to turn
the button sound off again.
Note: If you do not press any button for approx. 20 seconds during manual setting,
the setting mode is exited and the normal display is shown. Entries that have already
been made will be saved.
You can perfom basic settings manually.
• Press and hold the SET| 12/24H button
for a few seconds until the year
2023 flashes in the time position.
• Press the +|MEM/RF button or the -| RCC button to change the respecti-
ve flashing value.
• Briefly press the SET|12/24H button to confirm your setting and switch to the
next option.
• You can change the following settings one by one.
Year, month, day, hour, minute, time zone and language.
A total of 7 languages are available, the following are GER (German), FRE
(French), ITA (Italian), SPA (Spanish), DAN (Dutch), SWE (Swedish) and ENG
To Next Page
Loading...
