- 21 -
Alarm
Your product has two wake-up alarms AL1 and AL2 that you can set separately.
Activate/deactivate alarm
• Press the ALARM button
to enter alarm mode. OFF-AL1 is displayed.
• Press the ALARM button
again to enter the 2nd alarm. OFF-AL2 is displayed.
• In the respective alarm mode (1 or 2), press the +|MEM/RF button or the -|
RCC button to switch the alarm on (at the set alarm time) or OFF. If the alarm is
enabled, the respective alarm indicator will be displayed.
When the alarm is switched on, the alarm sounds at the set time and increases its
intensity twice every 10 seconds. If the alarm is not switched off, it will sound for
approx. 2 minutes.
Setting the alarm
• Press the ALARM button
to enter alarm mode. OFF-AL1 is displayed.
• Press the +|MEM/RF button or the -| RCC button to switch on the alarm
(at the set alarm time)
• Press and hold the ALARM button for a few seconds until the hours flash.
• Set the hours with the +|MEM/RF button or the -|RCC button .
• Briefly press the ALARM button to confirm your entry.
The minutes will flash.
• Set the minutes with the +|MEM/RF button or the -|RCC button .
• Briefly press the ALARM button to confirm your entry.
• Press the ALARM button 2x to enter the alarm 2. OFF-AL2 is displayed.
• Set alarm 2 in the same way.
• Press the ALARM button briefly to exit the alarm mode.
Snooze function (SNOOZE)
• When the alarm sounds, press the SNOOZE/LIGHT button
to temporarily
disable the alarm.
The SNOOZE indicator flashes in the display .
The alarm will sound again after approx. 5 minutes.
Note: The snooze function can be repeated up to 7 times.
To Next Page
Loading...
