AFW 2 A1
GB
│
IE
│
NI
│
19 ■
NOTE
► If you are currently in a country in which the MSF signal
is still being received but the current time zone is different,
you can use the time zone settings to set the radio weather
station to the current time in your country.
► If you are in a country in which the local time is one hour
behind of Coordinated Universal Time (UTC) you should
set the time zone to
. The radio weather station is still
being controlled by the MSF signal but will display the time
as one hour behind MSF of UTC.
Setting the alarm time and alarm day
♦ Press the ALARM button 8 to access alarm mode.
The current alarm time set and the display for the alarm
mode
( ) are shown on the time panel 5.
♦ Press and hold the ALARM button 8 for around 3 seconds.
The hour display blinks.
♦ Press the
–
/CH button 6 or the +/MEM button 7 to set
the required value.
♦ Press the ALARM button 8 to confirm your entry. The
minute display blinks.
♦ Press the
–
/CH button 6 or the +/MEM button 7 to set
the required value.
♦ Press the ALARM button 8 to confirm your entry. The
alarm symbol
appears on the time panel 5 to indicate
that the alarm function is active. In addition, the display for
the alarm day ( ) flashes on the date panel 1.
To Next Page
Loading...
