Auriol AFW 2 A1 - Data Display and Management

AFW 2 A1
■ 20
│
GB
│
IE
│
NI
♦ Press the
–
/CH button 6 or the +/MEM button 7 to set
the required alarm day ( = Monday to Sunday,
= Monday to Friday, = Saturday and Sunday).
NOTE
A bar display appears under the alarm symbol
on the time
panel 5 to show the set alarm days:
= no bars, = two
bars, = five bars.
♦ Press the ALARM button 8 to confirm your entry.
The display will now change back to basic mode.
Activate/deactivate alarm function
♦ Press the ALARM button 8 to access alarm mode.
The current alarm time set and the display for the alarm
mode
( ) are shown on the time panel 5.
♦ Press the ALARM button 8 briefly to activate the alarm
function. The alarm symbol
appears on the time panel 5
to indicate that the alarm function is active.
♦ Press the ALARM button 8 again briefly. The
alarm sym-
bol goes out and the alarm function is deactivated.
Switching off the alarm signal
The alarm signal will sound at the set time for around 2 minutes.
♦ Press any button with the exception of the
SNOOZE/LIGHT button 9 to switch the alarm signal off.
You do not have to reactivate the alarm function. The alarm
signal will automatically sound again at the set time.