AFW 2 A1
GB
│
IE
│
NI
│
25 ■
Troubleshooting
Connected USB device does not charge
■ Weather station is not being operated on mains power.
Connect the mains adapter z to the weather station.
■ No plug connection to USB device.
Check the plug connection.
■ The charging current of the connected device is too high
(> 2.1 A).
The device cannot be charged by the weather station.
Connection cannot be made to the outdoor sensor.
■ Disruptive obstacles or other interference sources such as
concrete walls or other radio transmission devices are located
between the weather station and the outdoor sensor.
Change the installation location and try again.
■ Distance between weather station and outdoor sensor is too
great.
Decrease the distance. "Visual contact" between the
outdoor sensor and the weather station often improves
the transmission.
■ The batteries in the weather station or the outdoor sensor are
dead.
Replace the batteries.
To Next Page
