EasyManua.ls Logo

Auriol AFW 2 A1 - Cleaning and Storage; Cleaning the Device; Device Storage

Auriol AFW 2 A1
75 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AFW 2 A1
■ 26 
│
 GB
│
IE
│
NI
Synchronisation with MSF signal not possible
■ Disruptive obstacles or other interference sources such as
concrete walls or other radio transmission devices are
interfering with MSF signal reception.
Change the installation location (e.g. near a window)
and try again.
■ The batteries in the weather station are dead.
Replace the batteries.
Cleaning
DANGER
Risk of electrocution!
► Remove the mains adapter from the power socket before
starting to clean the device.
CAUTION
► To avoid irreparable damage to the device, ensure that no
moisture can penetrate the device during cleaning.
► Do not use caustic, abrasive or solvent-based cleaning
materials. These can damage the surfaces of the device.
♦ Clean the surfaces of the device with a soft, dry cloth.
For stubborn dirt, use a slightly damp cloth with a mild
detergent.
Storage
♦ If you do not intend to use the product for an extended
period of time, disconnect it from the power supply or
remove the batteries and store it in a clean, dry place
without exposure to direct sunlight.

Table of Contents