AUTEC LK NEO 10 DF - Page 11

AUTEC - Air series
Light signals 11
LILK1E00-01
The red LED [A]… Meaning
... blinks three times per second
during start up.
Thebatteryis󰘱at.
... is steady on for 2s. The transmitting unit does not work correctly.
… blinks slowly (one blink per
second).
The battery has less than 1h run time.
... blinks fast. The battery has a 10min run time.
LEDs … Meaning
… the green [B] and red [A] LEDs
are steady on during start up.
A wrong "Key ID 0-1" or "ID internal tx memory" has been
inserted in the transmitting unit, or this is a "BACK-UP
UNIT".
…the green [B] and red [A] LEDs
blink 3 times per second during
start up.
The "Key ID 0-1" or the "ID internal tx memory" is
damaged.
... the green [B] and red [A] LEDs
blink alternately.
30 s left before the transmitting unit automatically switches
o󰘯.
The green LED [B] blinks and the
red LED [A] is steady during start
up.
The procedure corresponding to the UNPAIR submenu
has been carried out.
5.2.2 Battery [D]
The battery icon [D] has a coloured bar, whose length is proportional to the battery power level.
Symbol Meaning
High power level (green bar).
Medium power level (green bar).
Low power level (red bar).