22
LILK1E00-01
Operation
AUTEC - Air series
7.10 Zero-G sensor
The Zero-G sensor cuts in when the transmitting unit crashes, rolls, drops or is thrown.
Thebehaviourofthesensorcanbeadaptedtoapplication-specicneedsanditispossible
to choose its behaviour from the list below:
- switchingothetransmittingunit
- deactivationofthemachine'sfunctions
- activationofaspecicmachine'sfunction(i.e.horn).
The Zero-G sensor is only provided in the transmitting unit upon request of the manufacturer
of the remote controlled machine and/or of the installer of the radio remote control on the
machine.
This sensor can never be considered or used as a safety function.
This must be taken into account in the risk assessment of the "machine +
radio remote control" system.
The machine's manufacturer and/or the installer of the radio remote control
on the machine have the responsibility to decide the behaviour of the Zero-G
sensor.
To Next Page
Loading...
Need help?
General
