AUTEC LK NEO 10 DF Original Instructions

10
LILK1E00-01
Light signals
AUTEC - Air series
5.2 Light signals of unit LK NEO 10 DF
Display icons
A Red LED
B Green LED
D Battery
E Radio link
The following icons are always available on the display of LK NEO 10 DF transmitting units:
- Red LED [A] and green LED [B] providing information about the radio remote control
- Battery [D] providing indication of the battery power level
- Radio link [E] providing indication of radio link strength.
For further information provided on the display and related to the Data Feedback function,
see paragraph 6.3.
5.2.1 Red LED [A] and green LED [B]
The green LED [B] … Meaning
…is o󰓐. Thetransmittingunitisswitchedo󰘯.
... is steady on. The transmitting and receiving unit do not communicate.
… blinks fast.
The transmitting and receiving unit communicate. It is only
possible to send commands after pressing the START
pushbutton.
… blinks slowly (one blink per
second).
It is possible to send commands.
The red LED [A]… Meaning
…is o󰓐. The transmitting unit works correctly.
… is steady on during start up. The STOP pushbutton is pressed or damaged.
... blinks twice per second during
start up.
At least one of the commands that were checked at start-
up is enabled or damaged (see technical data sheet).

AUTEC LK NEO 10 DF Specifications

General

Brand	AUTEC
Model	LK NEO 10 DF
Category	Transmitter
Language	English