AUTEC LK NEO 10 DF - 5 Light Signals; Light Signals of Units LK NEO 10 and LK NEO 12

8
LILK1E00-01
Light signals
AUTEC - Air series
5 Light signals
5.1 Light signals of units LK NEO 10 and LK NEO 12
In LK NEO 10 and LK NEO12 transmitting units, a green LED [B] and a red LED [A] are always
available, and they provide information regarding the radio remote control.
A Red LED
B Green LED
C
LEDs for Data
Feedback function
Symbol Meaning
This symbol indicates the red LED [A].
This symbol indicates the green LED [B].
The green LED [B] … Meaning
…is o󰓐. Thetransmittingunitisswitchedo󰘯.
... is steady on. The transmitting and receiving unit do not communicate.
… blinks fast.
The transmitting and receiving unit communicate. It is only
possible to send commands after pressing the START
pushbutton.
… blinks slowly (one blink per
second).
It is possible to send commands.