AUTEC LK NEO 10 DF Original Instructions

24
LILK1E00-01
Operation
AUTEC - Air series
If the Enabling switch is used as a consent actuator, it shall be activated at the same time
as other actuators to send the corresponding command to the machine. The manufacturer of
the remote controlled machine and/or the installer of the radio remote control on the machine
de󰘰newhichactuatorswillneedtheactivationoftheEnablingswitchtosendcommandsto
the machine.
The Enabling switch can only be activated with hands. Any other activation
means (e.g. elastic band or tape) is inappropriate.

AUTEC LK NEO 10 DF Specifications

General

Brand	AUTEC
Model	LK NEO 10 DF
Category	Transmitter
Language	English