AUTEC LK NEO 10 DF User Manual

6 Plates
The following instructions refer to the plates on di󰘯erent types of Radio Remote Controls
where the LK NEO 10, LK NEO 12 and LK NEO 10 DF (Model LKN Type LA2EM, DA2FM)
Transmitting Unit may be used.
6.1 Plates on the LK NEO 10, LK NEO 12 and LK NEO 10 DF (Model LKN
Type LA2EM, DA2FM) Transmitting Unit in a Radio Remote Control
Plate Position Content
Radio Remote Control
identi󰄈cation plate
Key ID 0-1 (if present)
Radio Remote Control serial number
(S/N)
Battery housing (if the
“ID internal tx memory” is
present)
Transmitting Unit
identi󰄈cation plate
Battery housing
Manufacturing year, bar code and
Transmitting Unit identi󰘰cation number
(TU ID)
Technical data plate Battery housing
MODEL, TYPE and main Transmitting
Unit technical data, marking and
possible Radio Remote Control marks
6.2 Plates on the LK NEO 10, LK NEO 12 and LK NEO 10 DF (Model LKN
Type LA2EM, DA2FM) Transmitting Unit in a "Take & Release" Radio
Remote Control
Plate Position Content
Radio Remote Control
identi󰄈cation plate
Key ID 0-1 (if present)
Radio Remote Control serial number
(S/N)
Battery housing (if the
“ID internal tx memory” is
present)
Transmitting Unit
identi󰄈cation plate
Battery housing
Manufacturing year, bar code and
Transmitting Unit identi󰘰cation number
(TU ID)
Technical data plate Battery housing
MODEL, TYPE and main Transmitting
Unit technical data, marking and
possible Radio Remote Control marks
18
LIULK1ES0_eng-01
Plates
AUTEC - Air series

AUTEC LK NEO 10 DF Specifications

General

Brand	AUTEC
Model	LK NEO 10 DF
Category	Transmitter
Language	English