AUTEC LK NEO 10 DF User Manual

Signal Meaning
The green [B] and red [A] LEDs are
steady on during start up.
A wrong "Key ID 0-1" or "ID internal tx memory" has been
inserted in the Transmitting Unit, or this is a "BACK-UP
UNIT".
The green [B] and red [A] LEDs
blink 3 times per second during
start up.
The "Key ID 0-1" or the "ID internal tx memory" is
damaged.
The green LED [B] is lit with a
steady light and the red LED [A]
blinks two times per second during
start up.
The START pushbutton is activated.
The green [B] and red [A] LEDs
blink alternating.
30 s left before the Transmitting Unit automatically
switches o󰘯.
The green LED [B] repeats the
sequence: 3 blinks and a pause,
and the red LED [A] is steady on
during start up.
The UNPAIR procedure has been carried out.
7.2.2 Battery [D]
The Battery icon [D] has a bar, whose length and colour indicate the battery power level.
Symbol Meaning
High power level (green bar).
Medium power level (green bar).
Low power level (green bar): the battery has less than 1h run time from the
beginning of this signal.
Very low power level (red bar): the battery has 10min run time from the beginning
of this signal.
The Unit is about to switch o󰘯 (blinking red bar): the battery has 2min run time
from the beginning of this signal.
AUTEC - Air series
Light signals 25
LIULK1ES0_eng-01

AUTEC LK NEO 10 DF Specifications

General

Brand	AUTEC
Model	LK NEO 10 DF
Category	Transmitter
Language	English