The Machine Manufacturer and/or the Installer must provide the User with the
instructions and warnings concerning possible risks that may originate from
the Machine stop (by way of example: movement inertia, swinging load…).
NEVER USE TAPE, RUBBER BANDS OR OTHER OBJECTS TO INTERFERE
WITH THE OPERATION OF THE "ENABLING&STOP" PUSHBUTTON. DOING
SO COULD DAMAGE THE UNIT, PREVENTS THE PROPER FUNCTIONING
OF THE UNIT AND COULD CAUSE SERIOUS INJURY OR DEATH, AND/OR
PROPERTY DAMAGE.
The stop function activated by the ”Enabling&Stop” pushbutton meets the
requirements up to PL=d according to the EN ISO 13849-1.
30
LIULK1ES0_eng-01
General operating instructions
AUTEC - Air series
To Next Page
Loading...
