Autel Robotics EVO 2 - Gimbal and Camera

17
 LED Warning Descriptions
LED 1
LED 2
LED 3
LED 4
Warning Description
Charging temperature is too high
or too low.
Charging current is too high and has
caused a short circuit.
Overcurrent, overload, or a short
circuit has occurred during
discharge.
- Flashing Light - Off
2.1.4 Gimbal & Camera
The aircraft contains a high-precision 3-axis gimbal that keeps the camera
steady while the aircraft is flying, ensuring image stability and clarity. To operate
properly, the gimbal temperature must be between -10°C and 50°C (14°F and
122°F). You can use the remote control's gimbal pitch dial or the Autel
ExplorerTM app to adjust the pitch axis to any angle from 0° to 90°.
Three user-changeable gimbal modules are available for use with the EVO 2:
 586 gimbal: provides an 8K video camera
 383 gimbal: provides a 6K camera with a 1-inch sensor
 Dual-sensor gimbal: provides an infrared camera and an 8K video
camera