34
4. Start the motors and take off using the remote control.
5. Pilot the aircraft carefully.
6. Land the aircraft, then shut down the motors.
4.2.1 Motor Start & Aircraft Takeoff
NOTE
The aircraft will not take off if the battery level is 15% or lower.
Start the motors by holding both Command Sticks in position for 2 seconds:
OR
With the motors spinning, choose either of the following takeoff commands:
OR
If you command the aircraft to take off pressing the Take-off/Landing Button
( ), the aircraft will automatically ascend to a height of roughly 1.5 meters.
WARNING
The motors are hot after operation. Please handle with care.
4.2.2 Command Stick Controls (Mode 2)
Hold the Takeoff/Landing
Button for 2s
Push the Left Command
Stick slowly upward (Mode 2)