23
10 Settings
Access the Settings menu to adjust default settings and view information
about the TBE200. The Settings menu includes the following:
10.1 Network connection
This option is for connecting the tool to the Internet. There are two network
types available: Wi-Fi and Wi-Fi Direct. Simply swipe the toggle to turn it on.
NOTE
Ensure you turn on both the Wi-Fi and Wi-Fi Direct toggles when pairing the
tool with the ITS600/ITS600 Pro tablet for comprehensive inspection reports.
10.2 Brightness
This option allows you to adjust the screen brightness manually. Tap on the
brightness icon on the right to brighten the screen and tap the icon on the left
to dim the screen.
10.3 Sleep
This option allows you to set the amount of time before your tool goes into
“sleep/low-power mode” to conserve battery life. There are three options
available for selection (30, 60, and 120 seconds).
10.4 Automatic shutdown
This option allows you to adjust the time (in minutes) before your tool
automatically powers off. There are four options available for selection (5, 10,
15, and 20 minutes). After adjusting this setting, a check mark will display to
the right of the active selection.
To Next Page
Loading...
