24
10.5 Language and region
This option allows you to adjust the region for the TBE200. There are 19
regions available. Select the region where you will be using the device. A
check mark will display to the right of the selected region.
10.6 About
The About function provides information about the tool, including the
manufacturer, model name, serial number, password, firmware version and
Wi-Fi MAC.
10.7 Update
The update option displays the latest software updates available for the tool.
Before updating the software, ensure the tool’s network connection is stable.
When a software update is available, a red dot will display atop the Settings
icon in the upper right corner of the Main Job screen. Tap Update to install
the software.
NOTE
When updating the software, ensure the tool is connected to the Internet and
that its battery is charged to at least 50 percent or is connected to a power
outlet.
10.8 Restore factory settings
Restore Factory settings enables you to restore your examination tool to its
original factory settings. Once restored, all personal data will be deleted, the
wear limit data adjusted, and the initial setup instructions displayed when first
used will display.
10.9 Resume animation guide
This option restores animation guides for performing the tire tread check,
brake disc check, and system calibration. When Recovery succeeded is
displayed, the animation guides are provided on the corresponding screens.
To Next Page
Loading...
