22 7
CONTROLS AND FUNCTIONS
Clamp
Storage Tabs
Flashlight
Flashlight
Serial
Number Tag
Heat Vent
Infrared
Thermometer
NEW BATTERY RESET
Follow the
screen
prompts to
Turn On the
Ignition or
to Turn on
the Engine
during the
procedure.
If the vehicle
does not
contain a
supported
smart charging
system, the
Unsupported
result is
shown.
If the vehicle
is too old to
support OBD II
communications
or if the R3-D
Battery Reset
Adapter is
not properly
connected, the No
VIN Found result
is shown.
NOTE:
When replacing the battery on a vehicle with a smart charging system, be sure
to install a battery that has an equal or greater CCA rating, and also that the
battery type matches the OEM battery. (Replace an AGM battery with an AGM
battery).Forvehiclesthatrequirethesmartchargingsystembereset,conrm
the compatibility of the tester and adapter with the vehicle prior to replacing the
battery.
When the battery
reset process
completes
successfully, the
Complete result is
shown. No further
action is needed.
To Next Page
Loading...
Need help?
General
