Section 2. Instal/ation
Section 2. Installation
2.1 General
Congratulations on selecting the
Autohelm
ST50 LCD radar to meet
all of your radar navigation requirements.
Although your ST50 radar is designed to the highest levels of quality
and performance, it can only attain those standards when a proper
installation of the equipment has been achieved.
This section provides practical guidelines to assist in the planning and
installation of the ST50 aboard your vessel.
2.2 Unpacking and Inspection
Use care when unpacking the ST50 radar from the shipping carton to
prevent damage to the contents. It is also good practice to save the
carton and the interior packing material until the radar has been
satisfactorily installed on the vessel. The original packing material
should be used in the unlikely event that it is necessary to return the
unit for service.
To Next Page
Loading...
