AUTOLIFT F900 - Lift Operation Procedures; How to Get In the Vehicle

4- HOW TO OPERATE THE LIFT
Before using the lift, the vehicle must be safely parked with emergency brake engaged and warning flashing
lights on. The operation is done through the Hand Control :
4.1 How to get in the vehicle
-Push “OUT” until the platform is completely out of the box
-Push “DOWN” until the platform is on the the ground and the roll stop is horizontal
-Wheelchair occupant gets on the platform
-Push “UP” and raise the lift up to the vehicle floor level
Wheelchair occupant gets in the vehicle
-Push “IN” , the lift will lower automatically to central position level and will stow in the box
Lift “F900”
Platform “OUT”
Platform “UP”
Platform “IN”
Platform “DOWN”