5-EMERGENCY OPERATIONS
5.1 Manual Movement of the Platform
The Platform can be manually pulled out and stowed again in the box. To operate it , just pull the
emergency wire (see Picture) that is placed in the right platform corner.
5.2 Emergency Lifting
1. Plug the lever in to the hand pump handle (Picture 1+ 2)
2. Move lever up and down
3. Using the hand pump lift the platform to the required height
4. Put the lever back in to its fixation
5. Contact an Autolift distributor or service point
Picture-1 Picture-2
5.3 Emergancy Lowering
1. Don’t remain in the area of the platform
2. Use the lever to open the lowering valve (Picture 3+4)
3. Very Slowly turn the valve clockwise and lower the platform carefully,
to the desired height. Don’t open to much otherwise the movement
could be to fast and could be dangerous
4. Close the valve by turning it anti-clockwise
Picture-3 Picture-4