Automated Logic OptiFlex FIO User Manual

OptiFlex™ I/O Expanders (part no. FIO)
Automated Logic Proprietary and Confidential A Carrier Company. © 2022 Carrier.
Rev. 7/12/2022
All rights reserved.
29
Document revision history
Important changes to this document are listed below. Minor changes such as typographical or formatting
errors are not listed.
Date
Topic
Change description
Code*
7/12/22 CE and UKCA Compliance Added UKCA compliance and updated for next gen
X-PM-AB-R-B
H
To monitor expander
communication
Updated input value X-PM-BM-E
1/19/22
Specifications
Updated EU Compliance
X-PM-BM-E
Wiring inputs and outputs >
Outputs
Added details about the expander returning to an
unconfigured state
X-TS-RB-E-BM
8/19/20
Cover, What are FIO expanders
Updated company logo
A-D
To adjust input and output
properties
Input Values
Caution added regarding assigning two microblocks to
the same physical input.
X-TS-RB-E-BK
FIO Expander power and
communication configurations
Removed power and configurations for the OFBBC and
referred user to the controller's <technical instructions>
X-D
What are the OptiFlex™ I/O
Expanders?
Added OFBBC-NR, OF1628, OF1628-NR, OF028-NR X-D
6/3/19
To wire the expander for
communications
Changed total wire length for the IO bus from 2000 feet
to 1000 feet
X-H-RD-E-TA
* For internal use only

Automated Logic OptiFlex FIO Specifications

General

Brand	Automated Logic
Model	OptiFlex FIO
Category	Extender
Language	English