10
GDO-11v1 SecuraLift
®
Owner Installation Instructions
Kit contents
03
fi g
02
fi g
OR
GDO-11v1 Multipiece C Rail And Accessory
1 x GDO-11v1 SecuraLift® Ero drive unit (Fig. 02)
1 x TrioCode™ Transmitter pack (Fig. 02)
(Pack includes 1x four button keyring transmitter and
1x two button keyring transmitter with batteries)
2 x Door attachment arms (Fig. 02)
1 x Accessory and hardware pack (Fig. 02)
1 x Chain (Fig. 02)
1 x C rail track pack (Fig. 02)
(Pack includes three C rail sleeves and four C rail tracks)
1 x Shuttle assembly (Fig. 02)
1 x Installation Manual
Power Head And Accessory pack
1 x GDO-11v1 SecuraLift® Ero drive unit (Fig. 03)
1 x TrioCode™ Transmitter pack (Fig. 03)
(Pack includes 1x four button keyring transmitter and
1x two button keyring transmitter with batteries)
2 x Door attachment arms (Fig. 03)
1 x Accessory and hardware pack (Fig. 03)
1 x Chain (Fig. 03)
1 x Shuttle assembly (Fig. 03)
1 x Installation Manual
Pre-Assembled Single Piece C-Rail
Note: The chain or belt in the single piece rail has been
tensioned by the factory.
IMPORTANT NOTE: If modifi cation to the track length
is required, adjustment must be made to the drive end
side only.
04
fi g
PLUS
To Next Page
Loading...
