Automatic Technology SecuraLift GDO-9v3 - Kit Contents

10
GDO-9v3 SecuraLift
®
Owner Installation Instructions
Kit contents
03
fi g
02
fi g
OR
PLUS
Drive Unit
1 x GDO-9v3 SecuraLift® Trio drive unit (Fig. 02)
1 x TrioCode™ Transmitter pack (Fig. 02)
(Pack includes two keyring transmitters and batteries)
1 x Wall mount transmitter with battery (Fig. 02)
2 x Door attachment arms (Fig. 02)
1 x Accessory and hardware pack (Fig. 02)
1 x Installation Manual
Pre-Assembled Single Piece C-Rail
NOTE: The chain or belt in the one piece rail has been
tensioned by the factory.
IMPORTANT NOTE: If a modifi cation to the length of the
track is required, the adjustment must be made from the
drive unit end only.
Multi Piece C-Rail
IMPORTANT NOTE: If modifi cation to the track length
is required, adjustment must be made only from drive
unit end only.
4 x C-Rail Track
3 x C-Rail Sleeve
1 x Shuttle Assembly
1 x Tension Chain Assembly
1 x Track Accessory Pack
1 x Chain
04
fi g