Automatic Technology SecuraLift GDO-9v3 - C-Rail Attachment

Owner Installation Instructions GDO-9v3 SecuraLift
®
13
C-Rail Attachment
11
fi g
12
fi g
Locate shaft into sprocket
Shaft
Hex fl ange screw taptite ‘S’ M4 x 10
Track bracket (x2)
Step 2 - Secure C-Rail to Drive Unit
Locate and insert the shaft of drive unit into the
track’s sprocket (Fig. 11).
Fix the two track brackets with four screws supplied
in accessory pack (Fig. 12).
a.
b.