How to troubleshoot Auto Close not working on Automatic Technology TEMPO ATS-2 Garage Door Opener?
If the Auto Close feature is not working on your Automatic Technology Garage Door Opener, the safety beam or its wiring may be faulty. Repair the safety beam or replace the wiring, and realign the optics. Refer to the Safety Beam instructions for more details.
How to fix an Automatic Technology TEMPO ATS-2 when the chain or belt moves, but the door doesn't?
If the chain or belt is moving but the Automatic Technology Garage Door Opener door isn't, it's possible the opener has become disengaged. To resolve this, re-engage the opener.
What does 2 flashes mean on Automatic Technology TEMPO ATS-2 Garage Door Opener?
When the Automatic Technology Garage Door Opener flashes 2 times, it indicates the PE is preventing the door from moving. Clear away any obstructions. Test Door. If unable to move the door and suspect beam is faulty, enter Safety Beam Emergency Close by pressing and holding a pre-coded button on transmitter for more than five seconds and the door will start closing.
What does 4 flashes mean on Automatic Technology Garage Door Opener?
When the Automatic Technology Garage Door Opener flashes 4 times, it indicates the wireless PE battery is low. Change PE Battery.
What does 6 flashes mean on Automatic Technology Garage Door Opener?
When the Automatic Technology Garage Door Opener flashes 6 times, it indicates maintenance is due after a pre-set number of cycles. Contact dealer to arrange service.
What does 7 flashes mean on Automatic Technology Garage Door Opener?
When the Automatic Technology Garage Door Opener flashes 7 times, it indicates the standby battery is faulty. Contact 1300 769 850 within Australia for assistance.
What does 8 flashes mean on Automatic Technology TEMPO ATS-2?
When the Automatic Technology Garage Door Opener flashes 8 times, it indicates the door was obstructed. Clear away any obstructions and test that the door opens/closes correctly. If the door is damaged, contact your door professional.
What does 9 flashes mean on Automatic Technology Garage Door Opener?
When the Automatic Technology Garage Door Opener flashes 9 times, it indicates the motor is overloaded or stalled. Check the door's operation by disengaging the motor and ensuring the door runs smoothly. If necessary, make door adjustments or contact your door professional.
What does 10 flashes mean on Automatic Technology TEMPO ATS-2 Garage Door Opener?
When the Automatic Technology Garage Door Opener flashes 10 times, it indicates the unit is running on battery power. Check the power supply.
Why isn't the courtesy light working on my Automatic Technology TEMPO ATS-2?
If the courtesy light on your Automatic Technology Garage Door Opener is not working, the LED has likely failed. Replace the LED.
How to increase or decrease force pressure for safety obstruction detection.
General| Brand | Automatic Technology |
|---|---|
| Model | TEMPO ATS-2 |
| Category | Garage Door Opener |
| Language | English |
To Next Page
