~ WARNING ~
ank you for purchasing automation equipment from Automationdirect.com
®
, doing business as
AutomationDirect. We want your new automation equipment to operate safely. Anyone who installs or
uses this equipment should read this publication (and any other relevant publications) before installing or
operating the equipment.
To minimize the risk of potential safety problems, you should follow all applicable local and national codes
that regulate the installation and operation of your equipment. ese codes vary from area to area and
usually change with time. It is your responsibility to determine which codes should be followed, and to
verify that the equipment, installation, and operation is in compliance with the latest revision of these codes.
At a minimum, you should follow all applicable sections of the National Fire Code, National Electrical
Code, and the codes of the National Electrical Manufacturer’s Association (NEMA). ere may be local
regulatory or government oces that can also help determine which codes and standards are necessary for
safe installation and operation.
Equipment damage or serious injury to personnel can result from the failure to follow all applicable
codes and standards. We do not guarantee the products described in this publication are suitable for
your particular application, nor do we assume any responsibility for your product design, installation, or
operation.
Our products are not fault-tolerant and are not designed, manufactured or intended for use or resale as on-
line control equipment in hazardous environments requiring fail-safe performance, such as in the operation
of nuclear facilities, aircraft navigation or communication systems, air trac control, direct life support
machines, or weapons systems, in which the failure of the product could lead directly to death, personal
injury, or severe physical or environmental damage (“High Risk Activities”). AutomationDirect specically
disclaims any expressed or implied warranty of tness for High Risk Activities.
For additional warranty and safety information, see the Terms and Conditions on our website. If you
have any questions concerning the installation or operation of this equipment, or if you need additional
information, please call us at 770-844-4200.
is publication is based on information that was available at the time it was published. At
AutomationDirect we constantly strive to improve our products and services, so we reserve the right to make
changes to the products and/or publications at any time without notice and without any obligation. is
publication may also discuss features that may not be available in certain revisions of the product.
T
is publication may contain references to products produced and/or oered by other companies.
e product and company names may be trademarked and are the sole property of their respective owners.
AutomationDirect disclaims any proprietary interest in the marks and names of others.
Copyright AutomAtiondireCt.Com
®
inCorporAted
All rights reserved
No part of this manual shall be copied, reproduced, or transmitted in any way without the prior, written
consent of Automationdirect.com
®
Incorporated. AutomationDirect retains the exclusive rights to all
information included in this document.
To Next Page
Loading...
Need help?
General