Automationdirect.com Stride SE3 Series - SE3-SW5 UG-T

SE3-USER-M
24
1st Edition, Dec. 2023
SE3 Series Industrial Unmanaged Ethernet Switches User Manual
mm [in]
30.0
1.18
63.6
2.50
149.8
5.90
95.0
3.74
15.0
0.59
23.2
0.91
140.0
5.51
30.0
1.18
103.8
4.09
8/9/2023
STRIDE INDUSTRIAL UNMANAGED ETHERNET SWITCH, 5 PORTS, (5) ETHERNET Gigabit (RJ45)
PORTS(S), -40 to +75 DEG C, METAL HOUSING, IP30, 35mm DIN RAIL OR PANEL MOUNT
mm
[inch]
UNLESS OTHERWISE
SPECIFIED UNITS ARE:
LATEST VERSION PART DIMENSIONS MAY DIFFER SLIGHTLY
DUE TO MANUFACTURER'S VARIANCES
NOT TO
SCALE
3rd
ANGLE
SE3-SW5UG-T
SHEET 1 OF 1
INCH UNITS USED FOR
PART DESIGN
1-800-633-0405
AutomationDirect.com
30.0
1.18
63.6
2.50
149.8
5.90
95.0
3.74
15.0
0.59
23.2
0.91
140.0
5.51
30.0
1.18
103.8
4.09
8/9/2023
STRIDE INDUSTRIAL UNMANAGED ETHERNET SWITCH, 5 PORTS, (5) ETHERNET Gigabit (RJ45)
PORTS(S), -40 to +75 DEG C, METAL HOUSING, IP30, 35mm DIN RAIL OR PANEL MOUNT
mm
[inch]
UNLESS OTHERWISE
SPECIFIED UNITS ARE:
LATEST VERSION PART DIMENSIONS MAY DIFFER SLIGHTLY
DUE TO MANUFACTURER'S VARIANCES
NOT TO
SCALE
3rd
ANGLE
SE3-SW5UG-T
SHEET 1 OF 1
INCH UNITS USED FOR
PART DESIGN
1-800-633-0405
AutomationDirect.com
30.0
1.18
63.6
2.50
149.8
5.90
95.0
3.74
15.0
0.59
23.2
0.91
140.0
5.51
30.0
1.18
103.8
4.09
8/9/2023
STRIDE INDUSTRIAL UNMANAGED ETHERNET SWITCH, 5 PORTS, (5) ETHERNET Gigabit (RJ45)
PORTS(S), -40 to +75 DEG C, METAL HOUSING, IP30, 35mm DIN RAIL OR PANEL MOUNT
mm
[inch]
UNLESS OTHERWISE
SPECIFIED UNITS ARE:
LATEST VERSION PART DIMENSIONS MAY DIFFER SLIGHTLY
DUE TO MANUFACTURER'S VARIANCES
NOT TO
SCALE
3rd
ANGLE
SE3-SW5UG-T
SHEET 1 OF 1
INCH UNITS USED FOR
PART DESIGN
1-800-633-0405
AutomationDirect.com
30.0
1.18
63.6
2.50
149.8
5.90
95.0
3.74
15.0
0.59
23.2
0.91
140.0
5.51
30.0
1.18
103.8
4.09
8/9/2023
STRIDE INDUSTRIAL UNMANAGED ETHERNET SWITCH, 5 PORTS, (5) ETHERNET Gigabit (RJ45)
PORTS(S), -40 to +75 DEG C, METAL HOUSING, IP30, 35mm DIN RAIL OR PANEL MOUNT
mm
[inch]
UNLESS OTHERWISE
SPECIFIED UNITS ARE:
LATEST VERSION PART DIMENSIONS MAY DIFFER SLIGHTLY
DUE TO MANUFACTURER'S VARIANCES
NOT TO
SCALE
3rd
ANGLE
SE3-SW5UG-T
SHEET 1 OF 1
INCH UNITS USED FOR
PART DESIGN
1-800-633-0405
AutomationDirect.com
SE3-SW5UG-T