Autonics BC Series User Manual

A-135
Color Mark Sensor
SENSORS
CONTROLLERS
MOTION DEVICES
SOFTWARE
(A)
Photoelectric
Sensors
(B)
Fiber Optic
Sensors
(C)
LiDAR
(D)
Door/Area
Sensors
(E)
Vision
Sensors
(F)
Proximity
Sensors
(G)
Pressure
Sensors
(H)
Rotary
Encoders
(I)
Connectors/
Connector Cables/
Sensor Distribution
Boxes/ Sockets
Indicator Display
Troubleshooting
※
Indicator status
ON OFF
Flashing (every 0.5 sec) Flashing alternately (every 0.5 sec)
Problem Cause Troubleshooting
Will not operate
Power supply Supply power within rated specications
Connection error Check the cable connections.
Will not operate
occasionally
Excess light intensity alarm during teaching, output
chattering
Install the sensor at a 10 to 20 degree angle.
(when sensing metal or glossy objects)
Converter external light interference
Install a visor on the sensor or install the unit away
from the external light source.
Contamination of sensor cover
Remove the substance using a soft brush and reset
the sensitivity.
Connector error Check connector assembly.
Other error - Check the display status of the indicators.
Status
Operation indicator
(red LED)
Stability indicator
(green LED)
Teaching indicator
(full color LED)
Timer indicator
(orange LED)
Timer ON Timer OFF
Normal
operation
Stable match
(teaching color)
Unstable match
Unstable mismatch
Stable mismatch
Sensitivity
setting
(C mode)
Fine (red)
Normal (green)
Rough (blue)
Sensitivity
setting
(C+I
mode)
Fine (red)
Normal (green)
Rough (blue)
Teaching
setting
Teaching standby (orange)
Normal teaching (teaching color)
Teaching
error
Excess light intensity (green)
Insu󰀩cient light intensity (red)
Fluctuating light intensity (blue)
Timer
setting
ON (teaching color)
OFF (teaching color)
Overcurrent input

Autonics BC Series Specifications

General

Brand	Autonics
Model	BC Series
Category	Accessories
Language	English