Autonics CX6M-1P Series - Page 68

6 Timer mode
68 © Copyright Reserved Autonics Co., Ltd.
Output
mode
Time chart
OND.2
[ONd2]
Power ON Delay 2 (Power Hold)
1)Power ON Time Start (there is no INA function)
2)RESET ON: Time RESET
RESET ON→OFF: Time Start
3)Control output operates as retained (Hold) or one-shot
output.
4)It memorizes display value at the moment of power
OF F.
OND.3
[ONd3]
Signal ON Delay 3 (Power HOLD/RESET)
1)Power ON Time Start (there is no INA function)
2)RESET ON: Time RESET
RESET ON→OFF: Time Start
3)Control output operates as retained (Hold) or
one-shot output.
4)If time reached setting time at the moment of power
ON, it is automatically reset.
※Power RESET: There is no memory protection. (resets the display value when power is off)
※Power Hold: There is memory protection. (memorizes the display value at the moment of
power off, indicates the memorized display value when power is resupplied.)