Autonics TM Series User Manual For Communication

Safety Precautions
VIII © Copyright Reserved Autonics Co., Ltd.
 Keep dust and wire residue from flowing into the unit.
Failure to follow this instruction may result in fire or product damage.
 Check the polarity of the measurement input contact before wiring the temperature sensor.
Failure to follow this instruction may result in fire or explosion.
 For installing the unit with reinforced insulation, use the power supply unit which basic level
is ensured.
※ The above specifications are subject to change and some models may be discontinued
without notice.

Autonics TM Series Specifications

General

Brand	Autonics
Model	TM Series
Category	Temperature Controller
Language	English