Autool CT-200 User Manual

-
- 1 -
-
Working Condition and Specification
1.1 Working Condition:
Powersupply: AC220V±10%
Frequency: 50HZ±0.5
Humidity:
＜
85%
Environment Temperature:0℃～＋40℃
Magnetic Field: ＜400Ａ/m
Sparkand fire is prohibited.
2.2 Specifications:
Fuel Tank Capacity:2000 ml
Capacity ofMeasuring Cylinder: 125 ml
Speed Range: 0~7500 rpm
Injecting Times: 0~9900 Step: 100ms
PWMPulse: 0~20.0 ms Step: 0.1 ms
System Pressure: 0~0.6Mpa (adjustable)
Time: 0~20 minute (adjustable)
Power of Ultrasonic Cleaning: 70W
Frequency ofUltrasonic Cleaning: 28 KHZ±0.5 KHZ

Autool CT-200 Specifications

General

Brand	Autool
Model	CT-200
Category	Service Equipment
Language	English

Summary

Working Condition and Specification

Working Condition

Specifies power supply, frequency, humidity, temperature, and magnetic field limits for operation.

Specifications

Lists fuel tank capacity, cylinder capacity, speed range, and cleaning parameters of the device.

II Structure

Component Identification

Identifies the physical parts of the fuel injector tester and cleaner unit.

Operation Panel Overview

Details the controls and display elements of the machine's operation panel.

III Operation

Ultrasonic Cleaning

Covers preparation and procedural steps for cleaning injectors using ultrasound.

Injector Test

Details preparation and procedures for various injector performance tests.

Reverse Flushing

Explains preparation and steps for performing reverse flushing on injectors.

Non-dismantle Cleaning

Guides on preparation and execution of cleaning the entire fuel system.

IV Tidy and Maintenance

Tidy and Cleaning

Instructions for cleaning the machine and properly storing test fluids.

Maintenance Procedures

Guidelines for changing cleaning fluid and general unit maintenance.

V The Cleaning and Testing Fluids

VI Warranty