Autool CT-200 - III Operation; Ultrasonic Cleaning

-
- 3 -
-
2. Start: To run the function that selected;
3.Arrowkey: To adjust pulse working time and injection times;
4. PAUSE
5. Arrowkey: To select function item and adjust pulse width ;
6. STOP
7. Pressure down
8. Pressure up
9. Pressure Meter
Ⅲ
Operation
3.1 Ultrasonic Cleaning
3.1.1 Preparation
1
）
Move the injector from the car. Check and make sure that the seal ring
of the injector is in good condition. If not, please replace it to avoid the
leakage. Clean out side ofinjector carefully by gasoline or cleaning fluid.