-
- 13 -
-
Remove the hose and let the engine back to its normal condition.
11) Turn on the engine and run it for 2-3 minutes under high speed, and
checkif there is any leakage occurs.
Note：
1)The Non-dismantle cleaning fluid is inflammable, so please take care to
avoid any hurt.
2)Make sure that all the connections are in good condition before
performance the cleaning.
IV Tidy and Maintenance
4.1 Tidy
Step 1: Shut down the power supply.
Step 2: Put the testand cleaning fluid back to the original bottle, and
clean the machine with dry soft cloth.
Step 3: The testing fluid in tank should be put backto original bottles for
preservation.
4.2 Maintenance
Exchange Cleaning Fluid
After being used for long time, the fluid must be changed to avoid that
the
injector is blocked by the impurity.
Exchanging Process
Step 1: Remove the fluid-release screwcap to let all the liquid out.
Step 2: Pour some newfluid to wash the inside and then release it.
Step 3: Fixthe screwcap on, and add two bottles ofnewcleaning fluid.
To Next Page
Loading...
Need help?
General
