AUTOOL SDT206 model is a high-end automotive smoke machine.
It is the star of the SDT models range and has been the best seller
since its release in 2016 because of its stable performance. It
comes with two test modes: Air mode and smoke mode. With the
help of air mode, it is possible to diagnose whether there is a leak
through the pressure gauge with no need to output smoke. And
the smoke mode has an independently controlled smoke genera-
tor, which can be activated in case a leak is found, enabling you to
locate the leak precisely.
AUTOOL SDT206 model comes with built-in 2 groups of high
-power air pumps, no need to purchase additional air pumps or air
compressors. There is a visualized oil level gauge that can effec-
tively observe the filling amount and purity of the test oil. Effective
observation and control of smoke flow with visual flow meter and
adjustable knob. Besides, visualized pressure gauges make it
easier and faster to detect leaks.
Any other use is considered beyond the intended purpose of the
equipment and is prohibited.
PRODUCT INTRODUCTION
Overview
Low oxygen combustion
The AUTOOL smoke leak detector employs a forced combus-
tion smoke generation method in a low oxygen environment. It
is energized by a conductive column to the heating wire, which
rapidly heats up to more than 300°C so that the mineral oil
reaches the ignition point and enters the state of combustion.
Due to the small intake of air flow, it is insufficient to provide
sufficient oxygen to maintain full combustion, thus the combus-
tion mainly occurs on the surface of the heating wire. Subject
to high-temperature heating, the mineral oil retention object
can continue to burn insufficiently around the heating wire,
thus producing a large amount of smoke.
Working
theory
●
6
To Next Page
Loading...