Autopilot ChlorSync CS50 User Manual

Page - 5
ChlorSync
®
Model Cell Options
The ChlorSync
®
system consists of the following components.
l Part #ECP0312 Power Center- Provides power and controls communication between the power center
and the cell.
l Three different cell options to choose from - CS30, CS40, CS50.
The chlorine output for each of the ChlorSync
®
models, which is based on a 24 hour chlorinator/
pump run time and a salt concentration of 3,500 ppm (mg/L), is listed in the table below.
Model Chlorine output lbs. (kg) per 24 hours
ChlorSync
®
CS30
1.1 lbs. (0.50 kg)
ChlorSync
®
CS40
1.4 lbs. (0.64 kg)
ChlorSync
®
CS50
1.7 lbs. (0.77 kg)
Power Center
WARNING - Failure to heed the following may result in permanent injury or death.
l RISK OF ELECTRICAL SHOCK - All electrical connections should be made by a licensed electrician or
certified electrical contractor.
l RISK OF ELECTRICAL SHOCK - Disconnect all AC power when installing or servicing this system.
Follow all state, local, and National Electrical Code(s) (provincial and Canadian Electrical Code(s) if
applicable). Use copper conductors only.
l RISK OF ELECTRICAL SHOCK - Before plugging or unplugging the ChlorSync
®
to the power center,
first switch off the AC power to the power center.
ChlorSync
®
Power Center
Figure 1

Autopilot ChlorSync CS50 Specifications

General

Brand	Autopilot
Model	ChlorSync CS50
Category	Lighting Equipment
Language	English