9
Cool
ing/Heating operation mode
1. Press the “MODE” button, select the Cooling or Heating operation mode.
2. By pressing the “ + ”or “ - ”button, you can set the temperature range from
16℃ (60℉)~32℃(90℉), the display changes as you touch the button.
3. By pressing the “SPEED” button, you can select the motor speed from LOW, MID,
HIGH, TURBO ,AUTO.
4. Press the “ON/OFF” button, the air-conditioner starts to operate.
5. Press the “ON/OFF” button again, the air-conditioner stops.
Note: The cold wind type has no heating function.
★
Fan operation mode
1. Press the “MODE” button, select the Fan operation mode.
2. By pressing the “SPEED” button, you can select the motor speed from LOW, MID,
HIGH.
3. Press the “ON/OFF” button, the air-conditioner starts to operate.
4. Press the “ON/OFF” buttn again, the air-conditioner stops.
Note: In the fan mode, the temperature settings is non-effective.
★
Drying operation mode
1. Press the “MODE” button, select the drying operation mode.
2. By pressing the “ + ”or “ - ”button, you can set the temperature range from
16℃ (60℉)~32℃(90℉), the display changes as you touch the button.
4. Press the “ON/OFF” button, the air-conditioner starts to operate.
5. Press the “ON/OFF” button again, the air-conditioner stops.
Note: In the dry mode, the speed settings is non-effective.
3) Precautions
● Before first time use of the remote controller, install the batteries and ensure the
“+”and “-” poles are correctly positioned.
● Ensure the remote controller is pointed to the signal receiving window, and that
there is no obstruction in between and the distance is 8m at the maximum.
● Do not let the remote controller drop or fling it at will.
Do not let any liquid in the remote controller.
Do not expose the remote controller directly to the sunlight or excessive heat.
● If the remote controller does not function normally, remove the batteries for 30
second before reinstall them. If that doesn't work, replace the batteries.
● When replacing the batteries, do not mix the new batteries with old ones or mix
batteries of different types, which could cause failure of the remote controller.
● If the remote controller is not to be used for a long period of time, remove the
batteries first, lest the leakage from them may damage the remote controller.
● Properly dispose the discarded batteries.
Note:
1. This is a universal remote controller which provide all the function buttons. Please
understand that some of the buttons may not function, depending on the specific air
conditioner you have purchased. (If a specific function is not available on the air
conditioner, pressing the corresponding button will simply have no respond.)