6
* Pr
ess this button to turn on/off the unit.
* This will clear the existing timer and SLEEP settings.
2. MODE Button
* Press this button, you can select the running mode as follows:
Note: HEAT mode is not available for cool only units.
3. TIMER Button
* With the unit on, press this button to set off timer or with it off to set on timer.
* Press this button once, the “ON(OFF)” will flash. Press “ + ” or “ - ” to set the
number of hours in which the unit will be turned on/off, with an interval of 0.5 hour,
and a range of 0.5-24 hours.
* Press it again to confirm the setting, the “ON (OFF)” will stop flashing.
* If the “TIMER” button is not pressed within 10 seconds after the “ON (OFF)” start
flashing, the timer setting will be exited.
* If a timer setting is confirmed, press this button again will cancel it.
4. HEAT Button
* Press this button to enter HEAT mode.
5. COOL Button
* Press this button to enter COOL mode.
6. SPEED Button
* Press this button, you can select the motor speed as follows:
Note: Auto air speed is not available in fan mode.
Turbo air speed is not available in auto mode.
This button is invalid in dry mode.
7. + & - Button
* Each time the “ + ” is pressed, the temperature setting will increase by 1℃(1℉)
and each time the “ - ” is pressed, it will decrease by 1℃(1℉) .
* The temperature setting ranges from 16℃ (60℉)～32℃(90℉).
Note: The temperature cannot be set in AUTO or Fan mode.
8. MENU & OK Button
* Press MENU button to enter the function selection mode. Then press , ,
and to choose the function which you want. After, press OK button, turn on this
function.
* In function selection mode, press , , and , the character in LCD will be
flashing if the function can be selected.
9. L/R SWING Button
* Press this button to activate left/right swing and press it again to fix the swing
To Next Page
Loading...
Need help?
General
