7
posi
tion.
10. U/D SWING Button
* Press this button to activate up/down swing and press it again to fix the swing
position.
11. HEALTH
* When the unit is on, press MENU button ,then press , , and to choose
“HEALTH” character, when the “HEALTH” character will blink, and press the “OK”
button to highlight (not highlight) the “HEALTH” character, which will activate
(deactivate) the health function.
12. SLEEP
* When the unit is on, press MENU button ,then press , , and to choose
the “SLEEP” character, when the “SLEEP” character will blink, and press the “OK”
button to highlight (not highlight ) the “SLEEP” character , which will activate
(deactivate) the function of sleep mode.
* The unit will exit SLEEP mode after 10 hours of continuous operation and restore to
the previous status.
Note: The SLEEP function cannot be activated in FAN and AUTO mode.
In the sleep mode, the screen of the air-conditioner is off.
13.DISPLAY
* Press the “MENU” button, then press , , and to choose the “DISPLAY”
character, when the character “DISPLAY” will blink, and press the “OK” button to
activate (deactivate) the function of screen display.
14.Iclean
* The unit will clean automatically the dusts on the evaporator and dry or blow-dry
the moisture.
* When the air-conditioner is off, press the “MENU” button, then press , ,
and to choose the “iCLEAN” character , when the “iCLEAN” character will
blink, and press the “OK” button to highlight ( not highlight) the character “iCLEAN”,
which will activate (deactivate) the function of cleaning.
* The cleaning function will close automatically after 30 minutes.
15.Child-lock
* Press the “HEAT” and “MODE” buttons at the same time and hold for at least 3
seconds to activate or deactivate the child-lock function.
* When the child-lock function is activated, the remote control will indicate “ ”.
16.Anti-F
* Anti-F function: When the unit is closed under the modes of cooling, dry or auto
(cooling), it will continue to operate for about 3 minutes to dry the moisture on the
evaporator, so as to prevent the accumulation of bacteria on the evaporator, which