12.
COMPUTER 334PCSP30T SOFTWARE SETTINGS
NETWORK CONNECTION MODE
ROUTER SET UP
LABEL SCALE SETTING
Set label scale to the corresponding IP address. After setting, use software’s “scale connection test”
icon for network testing, then connectivity will be normal. If it fails, please check that the PC’s IP
address is in the same segment.
1. Set the SSID name of the router (No more than 15 characters)
2. Set the type of router’s authentication, encryption algorithm, password,
Encryption type set as: WPA2-PSK
Encryption algorithm set as: AES
Password: No more than 15 characters
1. Long press the set button, enter the settings menu.
2. Select IP settings, set the IP address of the label scale.
NOTE: Need to be same network of routers which is the same IP address.
3. Select “SET WIFI” menu.
4. Enter the SSID WIFI set menu: input router’s SSID Name.
5. Enter the “WIFI password mode” select menu: select the WPA2-PSK/AES option.
NOTE: Need to be same as router encryption type.
6. Enter
7. After you're finished in the settings, restart the label scale, and the scale can be used for
wireless communications.
WIRELESS SCALE SETTING
COMPUTER
ROUTER
ETHERNET/WIRED
CONNECTION
WIRELESS
CONNECTION
WIFI
LABEL SCALE
To Next Page
Loading...
