8.
WEIGHING & PRICING
Method 1: Hotkey Operation
Method 2: General Operation
OPERATIONS & SETTINGS
1.
the label will print if it does not read 0.
2. When
3. If nothing is on the scale tray or you press the “zero” button when something is on the tray,
the light “zero point” will turn on, meaning the scale is under zero point condition.
4. The following operations, including peel, price with piece, discount, and price change are
based on automatic printing. If the scale is not under automatic print condition (automatic
• There are 224 hotkeys total that can be changed and printed by control PC.
• The above operation is suitable for hotkey 1-112. As for hot button 113-224, press the
button [PLU] + the corresponding hotkey.
• For easy operation, all PLU can print the latest illustration. The printing function is set by PC.
There are three methods for weighing and pricing. If the PLU information has been downloaded
from the PC or edited in the scale in advance, follow Method 1 and Method 2. If not, take
Method 3.
Example: Selling green onion weighing 1 lb., suppose the hotkey is 1, and the unit price is $1.50/lb.
Operation procedure: Press the button [ZERO] (if the screen already shows zero, the action can be
skipped). Put 1 lb. green onion on the scale tray and press hotkey 1. Now, the relevant weight, unit
price, and total amount will be shown on the screen and the label will be printed. (Note: In the non-
auto printing status, you need to press [PRN/ENTER]).
Example: Selling green onion weighing 1 lb., The Fresh Commodity Code is 10, and the unit price
is $1.50/lb.
Operation procedure: Press the button [ZERO] (if the screen already shows zero, the action can be
skipped). Put 1 lb. goods on the scale, press the button [PLU], input the LF code 10, and press
the button [PLU]. Now, the relevant weight, unit price, and total price will show on the screen and
the label will print. (Note: In the non-auto printing status, you need to press [PRN/ENTER]).
To Next Page
Loading...
