AVANT 220 - Engine Compartment; Battery Disconnect Switch; Trailer Coupling

Avant 220/225
34
.
Engine compartment
To access the engine, unlock the seat base by
pulling the lever under the seat forward and tilt the
seat forward:
1.
2.
WARNING
Allow engine to cool before
accessing the engine. Engine and
exhaust parts may be extremely
hot after use.
The adjacent warning label is
located on the engine. Hot areas
include the engine in general, and
especially its exhaust pipe(s) and
surrounding areas.
CAUTION
Be careful when handling the seat
base and keep hands and fingers
clear when lifting or lowering -
uncontrolled movements may
crush or cut.
WARNING
Shut off engine and allow it to cool
before accessing engine
compartment. Moving or rotating
parts may injure.
Battery disconnect switch
The loader is equipped with a battery disconnect
switch (main switch). The switch is located under the
driver's seat in the engine compartment, on the left
hand side.
Battery disconnect switch cuts the current between
battery and the rest of the electric system. Always
switch off main current when the loader is not used
for a longer period of time in order that the battery
doesn't get empty, or when servicing the machine.
Trailer coupling
The loader is equipped with a 50 mm ball hitch type
trailer coupling for towing of light trailers.

Max. allowed vertical load 2000 N

Maximum towing load is 3000 N.