Avant 220/225
58
Falling of load - Risk of crushing
Always secure the loader boom
with the provided service support,
before going under the loader
boom. Remove any load and
attachments from the loader before
service or maintenance.
Check hydraulic hoses and
components only when the engine
is stopped and hydraulic pressure
is released. Repair all leaks as
soon as you have noticed them,
because a small leak can quickly
change into a big one.
Never operate the machine if you
have noticed faults or leaks in
hydraulic system. Leaking
hydraulic fluid can cause serious
personal injuries and is harmful to
the environment.
Check hydraulic hoses for eventual
cracks and wear. Follow the wear
of the hoses and stop operation if
the outer layer of any hose has
worn out. If there are signs of oil
leakage, put a piece of cardboard
under the probable leakage place
in order to find the leakage. If you
find fault, the hose or the
component must be replaced.
Contact your Avant dealer or
service for spare parts.
The fluids in the machine are
harmful to the environment.
Never allow fluids to leak in the
environment.
Take waste oil and fluids to
recycling station. Find out about
your local requirements
concerning the recycling or
disposal of other components.
To Next Page
Loading...
