Avantgarde UNO SD - Subwoofer DSP Amplifier Connections

WARNING
ELECTRICAL SHOCK HAZARD
DO NOT OPEN!
110 – 240V ~ 50/60HZ
MAX POWER CONSUMPTION – 550W
POWER OUTPUT – 500W RMS
FUSE 4.0 A SLOW
CLIP
VOL
VOL
SIG
SERVICE USE ONLY
12V DC
ENGAGED
FUSE
OUT IN
INPUT
SPEAKER LEVEL INPUT
OUTPUT
BALANCED SIGNAL
SPKR
RESET
MODE
XLR
MUTE
INPUT SELECTE FUSE
GROUND
POWER
TOGGLE
DIMMER
TRIGGER
DSP
DSP PROGRAMMING
A D
B C
SERIAL NO.
BASSAMP-G3-500
MADE IN GERMANY
MODEL NO.
ORIGIN
SPEAKER TYPE
UNO SD DUO SD
only to be used with marked speaker type
SERVICE USE ONLY
FUSE
PUSH
22 23
SAFETYINSTALLATIONOPERATION SUBFINE TUNING
MISC
WARRANTY
OPERATION
SAFETYINSTALLATIONOPERATION SUBFINE TUNING
MISC
WARRANTY
OPERATION
CONNECTION – SUBWOOFER DSP AMP
PASSIVE VERSION – SPEAKER LEVEL INPUTS
In the passive version, the speaker is operated via an external power
amplif ier. This amplif ier is connected to the speaker MID connector
of the speaker via a high-quality speaker cable.
The jumper cable (included in the accessory box) is used to connect
the signal f rom the speaker HIGH connector of the speaker (see
page 16) to the speaker level input of the DSP subwoofer ampli‐
fier.
Only now, connect the AC power of the components to a
household AC outlet and turn on the subwoofer DSP amplif ier.
1 1
WARNING
ELECTRICAL SHOCK HAZARD
DO NOT OPEN!
110 – 240V ~ 50/60HZ
MAX POWER CONSUMPTION – 550W
POWER OUTPUT – 500W RMS
FUSE 4.0 A SLOW
CLIP
VOL
VOL
SIG
SERVICE USE ONLY
12V DC
ENGAGED
FUSE
OUT IN
INPUT
SPEAKER LEVEL INPUT
OUTPUT
BALANCED SIGNAL
SPKR
RESET
MODE
XLR
MUTE
INPUT SELECTE FUSE
GROUND
POWER
TOGGLE
DIMMER
TRIGGER
DSP
DSP PROGRAMMING
A D
B C
SERIAL NO.
BASSAMP-G3-500
MADE IN GERMANY
MODEL NO.
ORIGIN
SPEAKER TYPE
UNO SD DUO SD
only to be used with marked speaker type
SERVICE USE ONLY
FUSE
PUSH
1
2
1
3
1
2
3
CONNECTION – SUBWOOFER DSP AMP
ITRON VERSION – BALANCED XLR INPUT
Line level connections feature balanced XLR connectors/terminals.
The pin assignment of these follows the EIA RS-297-A standard:
PIN 1 = GND, PIN 2 = HOT, PIN 3 = COLD. Never use cables with
differing pin assignment! This will deteriorate the sound quality and
can damage the amplif iers and/or the active power modules of the
subwoofers.
In the active iTRON version, the loudspeaker is driven by an external
preamplif ier. For this purpose, the line-level output of the preampli‐
fier is connected to the balanced line-level input of the iTRON am‐
plif ier with an XLR cable (see page 18).
The XLR jumper cable (included in the accessory box) connects the
balanced XLR daisy chain output of the iTRON amplif ier to the bal‐
anced XLR input of the DSP subwoofer amplif ier.
Only now, connect the AC power of the components to a
household AC outlet and turn on the ITRON module and the
subwoofer DSP amplif ier.
1
2
3
PUSH
2 1
3
OPERATION OPERATION
+ 1.5
+ 3
+ 6
WARNING
ELECTRICAL SHOCK HAZARD
DO NOT OPEN!
110 – 240V ~ 50/60HZ
MAX POWER CONSUMPTION – 570W
POWER OUTPUT – 530W RMS
FUSE 2.5 A SLOW
0dB 0dB
– 1.5
– 3
– 6
TOTAL GAINDRIVER GAIN
MIDRESET HIGH IN
OUT
BALANCED INPUT
+ 1.5
– 1.5
+ 1.5
– 1.5
0dB
ENGAGED
FUSE
E FUSE
UNO G3 DUO G3
ITRON AMP
MADE IN GERMANY
SPEAKER TYPE
MODEL NO.
ORIGIN
SERIAL NO.
only to be used with marked speaker type
FUSE
PUSH
4
5
+ 1.5
+ 3
+ 6
WARNING
ELECTRICAL SHOCK HAZARD
DO NOT OPEN!
110 – 240V ~ 50/60HZ
MAX POWER CONSUMPTION – 570W
POWER OUTPUT – 530W RMS
FUSE 2.5 A SLOW
0dB 0dB
– 1.5
– 3
– 6
TOTAL GAINDRIVER GAIN
MIDRESET HIGH IN
OUT
BALANCED INPUT
+ 1.5
– 1.5
+ 1.5
– 1.5
0dB
ENGAGED
FUSE
E FUSE
UNO G3 DUO G3
ITRON AMP
MADE IN GERMANY
SPEAKER TYPE
MODEL NO.
ORIGIN
SERIAL NO.
only to be used with marked speaker type
FUSE
PUSH
4
5