Avantree HT4186 - Setting Up Your TV Optical Connections

HT4186
User Manual
EN
If you connected to your TV via the optical OUT or “OPT OUT” port, you’ll need
to congure your TV settings before you’ll receive audio.
Using your TV’s remote control, press the SETTINGS button and navigate
to the AUDIO tab within the settings menu. (Please note that there may be
dierences in the setting names depending on your brand of TV).
STEP 1
Proceed to AUDIO OUTPUT and select “OPTICAL OUT / DIGITAL OUT”.
Many TVs will do this automatically; skip this step as needed.
STEP 2
Set the AUDIO OUTPUT format to “PCM / STEREO” ON or “ DOLBY ” OFF.
STEP 3
Sound
Audio Out Optical Out
Digital
Audio
Format
or
PCM/Stereo
Dolby - OFF
Setting Up Your TV (FOR OPTICAL CONNECTIONS ONLY)