Avantree HT4186 - Adding a Second Pair of Headphones

Connect the NB16T earbuds to the transmitter by following the steps in the
“Connecting the Earbuds to the Transmitter” section (Page 11).
STEP 1
Once the NB16T earbuds are successfully connected, put your transmitter into
pairing mode by pressing & holding the button until the LED ashes red
& blue alternately.
STEP 2
Put your 2nd pair of Bluetooth headphones into pairing mode. Please refer to
your headphones’ user manual for more details if necessary.
STEP 3
Keep the transmitter & your 2nd pair of headphones close together and wait
for 5-10 seconds until they connect. Once connected, the LED will turn a
solid blue.
STEP 4
EN
HT4186
User Manual
Adding a Second Pair of Headphones
You can connect and simultaneously listen through two pairs of
headphones if desired. Please refer to
avantree.com/4186/2nd-headphone-connection for more details.
NOTE: To easily reconnect the 2nd pair of headphones to the transmitter, you can
lock them to the transmitter by pressing & holding the transmitter’s button for 10
seconds or until you see the right LED turn solid PINK for 5 seconds.
For subsequent use, make sure your 2nd pair of headphones are not connected to
another device, then turn the headphones on and click the transmitter’s button
once to automatically reconnect the two devices.