No. Item Icon Description
4 NIC port (4) The NIC ports that are integrated on the network daughter card (NDC)
provide network connectivity.
5 USB 3.0 port The USB ports are of 9-pin and 3.0-compliant. These ports enable you
to connect USB devices to the system.
6 VGA port Enables you to connect a display device to the system.
7 USB Connectors
(2)
Allows you to connect USB devices to the system. These ports are USB
3.0-compliant.
8 Serial port Enables you to connect a serial device to the system.
9 iDRAC9 Enterprise
port
Enables you to remotely access iDRAC.
10 CMA power port N/A The Cable Management Arm (CMA) power port enables you to connect
to the CMA.
11 System
identification button
The System Identification (ID) button is available on the front and back
panel of the systems. Press the button to identify a system in a rack by
turning on the system ID button. You can also use the system ID button
to reset iDRAC and to access BIOS using the Step Through mode.
Avaya Converged Platform Server specifications
Server Specifications
The following table provides Avaya Converged Platform server specifications:
Note:
Profile 1 currently supports Common Server 3. Profile 1 servers are not covered in this
document. See the appropriate application-specific documentation for information.
Construct Profile #2 Profile #3 Profile #4 Profile #5
RMU 1U 1U 1U 1U
Intel Skylake CPU S-4114 S-4114 G-6132 G-6132
Number of CPU
sockets
1 2 1 2
Number of Cores
per CPU
10 10 14 14
Number of Cores
per Server
10 20 14 28
Core Frequency
(GHz)
2.2 2.2 2.6 2.6
Table continues…
Avaya Converged Platform Server specifications
December 2018 Installing the Avaya Converged Platform 120 Series 13
Comments on this document? infodev@avaya.com
To Next Page
Loading...
