Attaching cables
About this task
Use this procedure to attach network and I/O cables to the system.
Note:
Consult application-specific documentation for information on peripheral and management
device connectivity.
Before you begin
Ensure the system has been installed and secured as outlined in
Installing the server on page 19
before you attach cables. Ensure you have take precautions against electrostatic discharge as
outlined in Electrostatic discharge on page 17 before you begin.
Attaching cables
December 2018 Installing the Avaya Converged Platform 120 Series 23
Comments on this document? infodev@avaya.com
To Next Page
Loading...
